Best Smart Plug in India
We earn a commission if you buy through our links, at no extra cost to you. Brands cannot pay to be included. Read our affiliate disclosure and how we choose.
Short answer
Our top pick: TP-Link Tapo P110 16A Wi-Fi Smart Plug with Energy Monitoring
Our top pick of the five is the TP-Link Tapo P110 (opens in a new tab). It suits a buyer who wants energy monitoring and schedules, plus a load figure in both watts and amps to check against the appliance label. The other four suit narrower jobs.
Anyone who wants a very small plug that leaves the next socket free should look at the TP-Link Tapo P116M (opens in a new tab). It lists energy monitoring and Bluetooth control too, though its load is given in amps only. It is also the only one of the five whose listing mentions Matter.
The Qubo 16A smart plug (opens in a new tab) adds Bluetooth control for days when the internet is down. The Zebronics ZEB-SP116 (opens in a new tab) lists the higher of the two wattage figures in this group. The HomeMate 16A heavy duty plug (opens in a new tab) lists energy monitoring and Siri Shortcuts.
Every detail below comes from the makers' own pages. Nothing here ranks a plug on measured performance. Where a maker leaves a detail out, the page says Not stated.
- Best overallTP-Link Tapo P110 16A Wi-Fi Smart Plug with Energy Monitoring View on Amazon for TP-Link Tapo P110 16A Wi-Fi Smart Plug with Energy Monitoring (opens in a new tab)
- Bluetooth local controlQubo 16A Wi-Fi + Bluetooth Smart Plug View on Amazon for Qubo 16A Wi-Fi + Bluetooth Smart Plug (opens in a new tab)
- Matter support listedTP-Link Tapo P116M 6A Mini Wi-Fi Smart Plug with Energy Monitoring View on Amazon for TP-Link Tapo P116M 6A Mini Wi-Fi Smart Plug with Energy Monitoring (opens in a new tab)
- Siri Shortcuts listedHomeMate 16A Wi-Fi Smart Heavy Duty Plug with Energy Monitoring View on Amazon for HomeMate 16A Wi-Fi Smart Heavy Duty Plug with Energy Monitoring (opens in a new tab)
Comparison at a glance
| Plug | Rated current | Max load | Energy monitoring | Extras | Amazon |
|---|---|---|---|---|---|
| Tapo P110 | 16 A | 3680 W | Yes | Bluetooth setup | View on Amazon for TP-Link Tapo P110 16A Wi-Fi Smart Plug with Energy Monitoring (opens in a new tab) |
| Qubo 16A | 16 A | Not stated | Not stated | Bluetooth backup control | View on Amazon for Qubo 16A Wi-Fi + Bluetooth Smart Plug (opens in a new tab) |
| Tapo P116M | 6 A | 6 A (resistive) | Yes | Matter, mini size | View on Amazon for TP-Link Tapo P116M 6A Mini Wi-Fi Smart Plug with Energy Monitoring (opens in a new tab) |
| Zebronics SP116 | 16 A | 4000 W (resistive) | Not stated | 3 pin 16 A socket | View on Amazon for Zebronics ZEB-SP116 16A Smart Wi-Fi Plug (opens in a new tab) |
| HomeMate 16A | 16 A | Not stated | Yes | Siri Shortcuts | View on Amazon for HomeMate 16A Wi-Fi Smart Heavy Duty Plug with Energy Monitoring (opens in a new tab) |
Specs are the figures each maker publishes. "Not stated" means the maker does not publish it.
The picks
TP-Link Tapo P110 16A Wi-Fi Smart Plug with Energy Monitoring
TP-Link India gives a long set of details for the Tapo P110. The page lists a maximum load of 3680 W at 16 A. There is no separate rated current line on the page, so the 16A figure comes from that load entry.
The Tapo app shows power use and energy spend for whatever is plugged in. TP-Link says the plug can switch the connected device off when power use passes a threshold that you set. It also lists schedules and an automatic off timer.
According to TP-Link, you set the plug up over Bluetooth without a separate hub. The plug works only on 2.4 GHz Wi-Fi. Voice control covers Amazon Alexa, Google Assistant and Samsung SmartThings.
- Max load3680 W
- VoiceAlexa + 2 more
- Wi-Fi2.4 GHz only
- Rated current (A)
- 16A (TP-Link India lists "Maximum load: 3680W, 16A"; no separate rated-current line)
- Max load (W)
- 3680W, 16A
- Rated voltage
- 220-230 V~ 50/60 Hz
- Wi-Fi band
- 2.4 GHz WiFi Only (IEEE 802.11b/g/n)
- Voice assistants
- Amazon Alexa, Google Assistant and Samsung SmartThings
- Energy monitoring
- Real-time power consumption and energy spend via the Tapo app
- Scheduling
- Schedules and auto-off timer
- Child lock/overload
- Child safety shutter and overload protection
- App
- Tapo app (free)
- BIS/certification as stated
- CE (no BIS mark stated on the page)
- Material
- Flame-retardant body (as TP-Link lists it)
Good for buyers who want one plug that covers energy tracking, schedules and Alexa, Google Assistant and Samsung SmartThings.
Not for buyers who want Matter or Apple Home, since TP-Link lists Alexa, Google Assistant and SmartThings for it.
Pros
- Lists both a watt figure and an amp figure for its maximum load.
- A child safety shutter and overload protection both appear on the TP-Link page.
- The Tapo app shows power use and energy spend, and TP-Link lists schedules and an automatic off timer.
Cons
- The page shows a CE mark but no BIS mark.
- It connects on 2.4 GHz only, with no 5 GHz option.
Qubo 16A Wi-Fi + Bluetooth Smart Plug
The Qubo 16A plug puts its local control fallback in the product name. Qubo says it can be controlled over Bluetooth when the internet is down. That matters on days when the router is off but the phone is in the room.
The 16A rating needs a plain caveat. Qubo's support page title gives the 16A figure. The page has no separate rating line. Qubo's product page was not available to check.
Qubo says the plug works only on 2.4 GHz Wi-Fi. It adds that the plug is compatible with routers that merge 2.4 GHz and 5 GHz into one network. Qubo lists Alexa and Google Assistant. It says Apple HomeKit is not supported. Control runs through the Qubo app, and Qubo says timers and schedules keep working when the plug loses its internet connection.
- VoiceAlexa and Google Assistant
- Rated current (A)
- 16A (Qubo's support page is titled "Smart Plug 16 A"; it gives no separate rating line, and the product page returned HTTP 429)
- Wi-Fi band
- 2.4 GHz only; works with routers that combine 2.4 GHz and 5 GHz in one network
- Bluetooth
- Backup: the plug can be controlled locally over Bluetooth when the internet is down
- Voice assistants
- Alexa and Google Assistant (Apple HomeKit not supported)
- Scheduling
- Timer and schedule; Qubo says both keep working when the plug loses its internet connection
- App
- Qubo app (Android and iOS)
Good for buyers whose main worry is losing control when the internet drops.
Not for homes that use Apple Home, since Qubo says HomeKit is not supported.
Pros
- Bluetooth lets the plug work locally without internet.
- It works with routers that combine both Wi-Fi bands under one name.
- Voice control works through Alexa and Google Assistant.
Cons
- Qubo's support page gives no maximum load.
- The support page gives no certification mark or body material.
TP-Link Tapo P116M 6A Mini Wi-Fi Smart Plug with Energy Monitoring
The Tapo P116M is the compact option. TP-Link says the mini size avoids blocking adjacent outlets. That helps on a crowded extension board.
TP-Link India gives one current figure, 6 A for resistive loads, and this guide uses it as the rating. TP-Link gives no wattage figure, and this guide does not work one out.
TP-Link includes energy monitoring. The app has a field for your electricity rate, so it can estimate bills. TP-Link says Bluetooth lets the Tapo app control the plug even when it is off Wi-Fi. TP-Link lists Matter compatibility. It also lists Alexa, Google Assistant, Samsung SmartThings and Apple Home, and says a third-party platform needs its own hub. TP-Link's page also shows a 2-pack variant; the Amazon.in listing used here is a single plug.
- Max load6 A (resistive)
- Wi-Fi2.4 GHz plus Bluetooth
- Rated current (A)
- 6 A (TP-Link India lists "6 A Max (Resistive Load)"; no separate rated-current line)
- Max load (W)
- 6 A (resistive load)
- Rated voltage
- 200-240 V~, 50 Hz
- Wi-Fi band
- 2.4 GHz (IEEE 802.11b/g/n) plus Bluetooth
- Voice assistants
- Amazon Alexa and Google Assistant; Samsung SmartThings and Apple Home also listed; Matter compatible (TP-Link says third-party platforms need that platform's hub)
- Energy monitoring
- Yes, with electricity rate input for bill estimates
- Scheduling
- Schedules, countdown timer, Auto-Off, Away Mode
- Child lock/overload
- Child safety shutter, overload protection, zero-crossing protection
- App
- Tapo app
- BIS/certification as stated
- CE (no BIS mark stated)
Good for buyers who want energy tracking and wider smart home support in a small body.
Not for appliances whose label shows more than 6 A, since TP-Link rates this plug at 6 A for resistive loads.
Pros
- It is the only plug in this group whose listing mentions Matter.
- TP-Link's page adds zero crossing protection to the shutter and overload protection.
- Schedules, a countdown timer, an automatic off setting and Away Mode are all listed.
Cons
- The 6 A resistive load is the lowest current figure listed among the five.
- The listing has no material information and no BIS mark.
Zebronics ZEB-SP116 16A Smart Wi-Fi Plug
The Zebronics SP116 is the plain option. Zebronics lists the model as SP116 with a 16A maximum output current. The maximum power is 4000 W for resistive loads, the higher of the two wattage figures in this group.
Zebronics gives input and output as 100-250 V AC, 50/60 Hz. The plug uses a three pin socket rated at 16A and connects on 2.4 GHz Wi-Fi. The product title names Google Assistant and Alexa, and the app is the Zeb Home App.
Scheduling appears only as a tagline, "Scheduled Control". The same goes for "Child Safety". Zebronics also lists "Fire Resistant" as yes.
- Max load4000 W (resistive)
- VoiceGoogle Assistant & Alexa
- Wi-FiWi-Fi 2.4 GHz 802.11 b/g/n
- Rated current (A)
- 16A (listed as "Max output current")
- Max load (W)
- 4000W (Resistive)
- Rated voltage
- Input and output 100-250VAC, 50/60 Hz
- Wi-Fi band
- WiFi 2.4GHz 802.11 b/g/n
- Voice assistants
- Compatible with Google Assistant & Alexa (product title)
- Scheduling
- "Scheduled Control" (tagline)
- Child lock/overload
- "Child Safety" (tagline); "Fire Resistant: yes"; no overload protection listed
- App
- Zeb Home App
- Socket type
- 3 pin socket 16A
Good for buyers who want basic app control and a published wattage without extra features.
Not for homes run on Apple Home or SmartThings, since the Zebronics title names Google Assistant and Alexa only.
Pros
- It gives the larger of the two wattage figures, at resistive load.
- The listing names the socket type: three pin, 16A.
- Zebronics lists the body as fire resistant.
Cons
- The spec table has no energy monitoring, certification or warranty entry.
- No overload protection is listed.
HomeMate 16A Wi-Fi Smart Heavy Duty Plug with Energy Monitoring
HomeMate sells its 16A heavy duty plug for big appliances, but its page gives no wattage figure. The 16A figure comes only from the product name, which carries it after the words Heavy Duty Plug Socket.
The listing gives no separate rating line, no watt figure and no voltage. The Wi-Fi band is also not stated. The maker SKU is HMLPG16, and HomeMate says the plug is made in India.
HomeMate lists energy monitoring across all your appliances through the HomeMate Smart App, with remote control from anywhere. Timers and schedules switch the plug on or off automatically. Voice control covers Amazon Alexa, Google Assistant and Siri Shortcuts.
- VoiceAlexa + 2 more
- Rated current (A)
- 16A (in the product name "WiFi Smart Heavy Duty Plug Socket - 16A"; no separate rating line)
- Energy monitoring
- Yes: "Monitor the energy consumption of all your appliances" through the HomeMate app
- Voice assistants
- Amazon Alexa, Google Assistant and Siri Shortcuts
- Scheduling
- Timer and schedule to switch the plug on or off automatically
- Child lock/overload
- Fireproof resistance, UV resistance, overload protection, surge protection, short circuit protection (as listed by HomeMate)
- App
- HomeMate Smart App, remote control from anywhere
- Maker SKU
- HMLPG16
Good for buyers who want energy readings and Siri Shortcuts. HomeMate markets it for big appliances.
Not for homes built on Matter or SmartThings, since HomeMate lists Alexa, Google Assistant and Siri Shortcuts.
Pros
- HomeMate lists overload protection, surge protection and short circuit protection.
- HomeMate also lists fireproof resistance and UV resistance.
- Siri Shortcuts support is listed, which the Qubo and Zebronics plugs do not mention.
Cons
- No wattage, voltage or Wi-Fi band appears on the listing.
- No certification mark is listed.
How to choose
Start with the load. Every appliance carries a rating plate or label with its wattage or current. Read that figure first, then compare it with the rating the plug maker states, in the same unit. The appliance figure should sit below the plug's stated limit. TP-Link adds that the total power of everything connected should not exceed the plug's maximum load.
Four of the plugs carry a 16A figure, but the makers give it in different ways. TP-Link pairs it with 3680 W. Zebronics calls it max output current and gives 4000 W for resistive loads. Qubo and HomeMate show 16A only in a title or name, with no watt figure. The P116M is rated at 6 A for resistive loads, so compare that figure with the label of any heater, geyser or air conditioner before you plug one in. If a plug's page gives no maximum load, ask the maker before you connect a high-power appliance to it.
Next, decide whether you want energy monitoring. The two TP-Link plugs and the HomeMate plug list it. The Qubo and Zebronics listings do not. For a closer look at that feature, see our guide to the best smart plug with energy monitoring.
Voice platforms differ. Every plug here lists Alexa and Google Assistant. Samsung SmartThings appears on both TP-Link plugs, Apple Home on the P116M, and Siri Shortcuts on the HomeMate.
Then look at the protection lists. These are maker claims, so read them as such. Both TP-Link plugs carry a child safety shutter and overload protection on their pages. HomeMate lists overload, surge protection and short circuit protection. Zebronics lists none for overload.
Network matters too. All of the plugs that name a band use 2.4 GHz. The wider range sits under smart plugs.
Last, look at certification. The TP-Link pages list CE and state no BIS mark. The other three listings state no certification at all.
If one plug is not enough, the best smart power strip guide covers a strip with switchable sockets. Lighting has its own guides, the best Wi-Fi smart bulb and the best colour smart bulb.
Verdict
The Tapo P110 suits most buyers who want one plug for everyday use and larger appliances within its stated load. Its page gives a load figure in watts and amps, a voltage range, energy tracking and scheduling.
Choose the P116M for a small body and Matter. Choose the Qubo when local Bluetooth control matters more than missing details. Choose the Zebronics SP116 for a plain plug with a published wattage. Choose the HomeMate for Siri Shortcuts. HomeMate markets its plug for heavy appliances, but its page gives no wattage.
Frequently asked questions
Does a smart plug work without Wi-Fi?
Most need a network to be controlled from outside the home. Two listings describe Bluetooth control without a network. Qubo says its plug can be controlled locally over Bluetooth during an internet outage. TP-Link says the Tapo app can reach the P116M over Bluetooth without Wi-Fi.
Can I use these plugs on a 5 GHz network?
None of the listings that name a band offer 5 GHz. Qubo says its plug works with routers that merge both bands into one network. Otherwise the plug must join the 2.4 GHz side.
Which of these plugs have energy monitoring?
The Tapo P110, the Tapo P116M and the HomeMate plug list it. The Qubo and Zebronics pages do not. The P116M also lets you enter your electricity rate for bill estimates.
Are these plugs BIS certified?
The listings do not show it. The TP-Link pages list a CE mark and state no BIS mark. The other three listings give no certification line.
Which plug works with Apple devices?
The Qubo page says Apple HomeKit is not supported. TP-Link lists Apple Home for the P116M. HomeMate lists Siri Shortcuts. The P110 and Zebronics listings do not mention Apple.
Do I need a hub?
TP-Link says setup uses Bluetooth and needs no separate hub on the P110. The other listings do not mention a hub.
Sources and credits
Facts and figures in this article draw on these sources. The wording is not copied from them.
- TP-Link India, Tapo P110 product page (opens in a new tab)
- Qubo, Smart Plug 16A support page (opens in a new tab)
- TP-Link India, Tapo P116M product page (opens in a new tab)
- Zebronics, SP116 product page (opens in a new tab)
- HomeMate, WiFi Smart Heavy Duty Plug Socket 16A product page (opens in a new tab)
Disclaimer
As an Amazon Associate, GreatestBuy earns from qualifying purchases. This does not change the price you pay or which products we include. This article is for information only. Product details come from the makers and the sources credited above and may change; please check them on the retailer's page before buying. If you find an error, tell us and we will correct it.
Guides are compiled from the makers’ published specifications and checked by the GreatestBuy Editorial Team. To report a wrong spec, tell us.